Automated side loader specifications

GENERAL BODY SPECIFICATIONS
MODEL INPAK ASL
TOTAL BODY CAPACITY 43 y³ (33 m³)
LENGTH 311’’ (789,94 cm)
WIDTH 101’’ (256,54 cm)
HEIGHT (Body only) 112’’ (284,48 cm)
TOTAL EQUIPMENT WEIGHT 10 000 lbs (4 536 kg) *
INTERIOR HOPPER WIDTH 96’’ (243,84 cm)
INTERIOR HOPPER LENGTH 60’’ (152,4 cm)
REAR DOOR OPENING ANGLE 101°
AUTOMATED ARM SPECIFICATIONS
MODEL SNIPER XL10 patented
REACH 129’’ (328 cm)
LIFTING CAPACITY 500 lbs (226,8 kg)
FULL CYCLE TIME 8 to 16 s
CART COLLECTION 32 to 96 gal. (120 to 360l )
WEIGHT OF THE ARM
(Included in total equipment weight)
875 lbs (397 kg)
ARM STRUCTURE


Machined parts 2’’ X 6’’
(5,08 cm x 15,24 cm)
Aluminum 6061-T6
2 LIFTING CYLINDERS

2 ½’’ x 1 ¼’’ x 10 ½’’
(6,35 cm x 3,175 cm x 26,67 cm)
1 REACH CYLINDER

2 ½’’ x 1 ¼’’ x 15 ½’’
(6,35 cm x 3,175 cm x 39,37 cm)
1 Reach and 1 Lift cylinders equipped with MTS Temposonic rods
1 TILT CYLINDER

2’’ x 1 ¼’’ x 4’’
(5,08 cm x 3,175 cm x 10,16 cm)
1 GRABBER CYLINDER

2’’ x 1 ¼’’ x 4 ½’’
(5,08 cm x 3,175 cm x 11,43 cm)
HYDRAULIC SYSTEMS
2 HYDRAULIC PUMPS

Variable flow pumps
and load with sensing controls
PUMP FLOW (COMPACTOR) 16,3 gpm O.I.G.A.I. (61,7 lpm)
PUMP FLOW (AUT. ARM) 16,3 gpm O.I.G.A.I. (61,7 lpm)
HYDRAULIC PRESSURE 2 500 psi (17 236 kPa)
HYDRAULIC OIL RESERVOIR 70 gallons US (265l )
2 STAGE COMPACTION SYSTEM SWEEPN’SEAL
STAGE 1 SWEEPER (Upper)
CYCLE TIME 8 s (complete cycle)
LENGTH 31’’ (78,73 cm)
WIDTH 90’’ (228,6 cm)
HEIGHT 43 ½’’ (110,49 cm)
PRESSURE 18 000 lbs (8 165 kg)
STAGE 2 COMPACTOR (Lower)
CYCLE TIME CYCLE TIME 20 s (complete cycle)
LENGTH 73 ¼’’ (186,055 cm)
WIDTH 94’’ (238,76 cm)
HEIGHT 45 ½’’ (115,57 cm)
PRESSURE 85 000 lbs (38 555 kg)
FULL EJECTION CYCLE TIME 1m40s @ 1000 rpm (complete cycle)
BODY COMPOSITION
FLOOR SECTION ¼’’ (0,635 cm)
Aluminum 5083-H32 special alloy
COMPACTION FLOOR SECTION Stainless steel plate inpak shield
gr 304 5/16" (0,794 cm)
WALL SECTION Aluminum 5083-H32 ¼’’
(0,635 cm) special alloy
COMPACTOR Aluminum 6061-T6 special alloy
SINGLE PIECE EXTRUSION RAILS Aluminum 6061-T6 special alloy
REAR DOOR Aluminum 5454-H32 special alloy
BODY HYDRAULIC CYLINDERS
1 REAR DOOR CYLINDER 4’’ x 2’’ x 31’’
(10,16 cm x 5,08 cm x 78,74 cm)
2 CYLINDERS DOOR LOCK 2’’ X 3’’ x 5 ½’’
(5,08 cm x 7,62 cm x 13,97 cm)
1 SWEEPER CYLINDER 3’’x 2’’ x 48 ¼’’
(7,62 cm x 5,08 cm x 122,56 cm)
1 COMPACTOR
& FULL EJECT CYCLINDER
with 4 telescopic sections

Compaction stroke lenght: 48’’ (121,92 cm)
Ejection lenght : 185 ½’’ (471,17 cm)
1 : 6 ½’’ (16,51 cm) 2 : 5 ½’’ (13,97 cm)
3 : 4 ½’’ (11,43 cm) 4 : 3 ½’’ (8,89 cm)
* Includes all components in this page, excludes the chassis Note : Specifications subject to changes without notice


Measurements


STANDARD EQUIPMENTS
OPTIONAL EQUIPMENTS
Body and Rear Door in Mill Brite Finish
two stage compaction system
Sweeper plate and compactor guided on rails with cam bearings
follower
2 Variable flow pumps
2 Cleanout doors on the left side
1 Adjustable rear bumper
Aluminum rear wheel protection wings
9 Proximity switches
1 PVG32 control valve
Dynamic automated arm patented
Triple grabber with rubber grips
Programmable central controls
Command center with color LCD screen, automatic cart counter
and alarms
Standard LED light kit
Hydraulic oil cooler
External Control for outside the cab multiple bin collection
Cleaning tools (broom, shovel & rake)
Storage box Aluminum 24’’x 24’’x 24’’ (61 cm x 61 cm x 61 cm)
5 lbs (2,27 kg) Fire Extinguisher
Right handed control kit (harnest + joystick)
Main telescopic cylinder with a 3 year warranty
Standard spill kit
Complete Rearview Camera system: Pivoting 7" LCD Monitor,
including sounds, night vision, 4in1 display, de-icing heater,
anti-parasit system, E/M cameras mounted (1) on
the body, (1) on the hopper and (1) on the rear door
1 Stroboscopic orange 4’’ (10,16 cm) rear working light
4 Directional + break 4’’ (10,16 cm) LED red lights
2 Alternative LED lights (pair)
4 Working LED white lights (1-Arm, 1-Hopper and 2-Rear)


Wastec active member
Patent Pending. All specifications may change without notice.

All Rights Reserved Inpak Vehicles Inc. ™ 2012